Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
18hp 2 Stroke Outboard Motor Gas Powered Water Cooling Boat Engine Long Shaft
This product ad may change over time
Share18hp 2 Stroke Outboard Motor Gas Powered Water Cooling Boat Engine Long Shaft
Flexible Steering: Forward, neutral and reverse gears, and a 360-degree steering function allow you to flexibly control the direction of the ship. Application This outboard motor is suitable for small ships with different materials(width less than 4.9 feet and length less than 19.7 inches), such as inflatable boats, iron boats, plastic boats, fiberglass boats, and …
Flexible Steering: Forward, neutral and reverse gears, and a 360-degree steering function allow you to flexibly control the direction of the ship. Application This outboard motor is suitable for small ships with different materials(width less than 4.9 feet and length less than 19.7 inches), such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats. It is widely used in fishery, aquaculture, outdoor exploration, etc. Gear Oil Filling Method There is a screw on the gearbox, unscrew the screw to add gear oil. Each machine will be filled with gear oil before leaving the factory, so it does not need to be refilled when it is used for the first time. After that, add according to personal use, and check every ten hours. Specification Material: Aluminum Alloy Color: Black Model: 18HP Horsepower Long Axis Displacement: 246CC Gear Ratio: 2.08 (27:13) Number of Cylinders: 2 Speed: 4500-5500RPM Gear: F-N-R Refueling Method: 92 Unleaded Gasoline is Recommended Oil Tank Capacity: 24L/6.34gal Load-bearing Capacity: 500-1000kg/1102-2204lbs Ignition System: CDI Cooling System: Water Cooling Control System: Tiller Control Start System: Manual Start Propeller Specification: 23.5cm/9.25in (Length) * 20.3cm/8in (Diameter) Suitable Stern Plate Height: 45cm-55cm/17.7*21.7in Cylinder Diameter * Stroke: 56mm/2.2in*50mm/2in Recommended Engine Oil: 2 Stroke Engine Oil Mixing Ratio: Fuel: Oil = 50:1 Trim and Tilt System: Manual Tilt Net Weight: 28kg/61.7lbs Gross Weight: 30kg/66.1lbs Package Size: 133*71*38.5cm/52.4*28*15.2in Product Size: 87.3*33.2*117cm(34.4*13.1*46.06inch) Package Included 1x Outboard Motor 1x Flameout Rope 1x Oil Pipe 1x Sealing Ring 1x Paper Pad 1x Spark Plug 1x Start Rope 1x Water Pump Impeller 1x Cotter Pin 1x Fuel Tank 1x English Manual Other Tools Notes 1. The two-stroke outboard must use a mixture of No. 92 gasoline and two-stroke engine oil. 2. The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1. 3. After the running-in period, the volume ratio of gasoline and oil is 50:1. 4. Special attention: gasoline and engine oil must be pre-mixed and stirred evenly, and then poured into the fuel tank. 5. The outboard motor must be started in water, do not start the engine on shore. 6. Loosen the vent screw on the fuel tank cover counterclockwise when starting. 7. When the outboard motor is started, the emergency flameout rope should be inserted, and the other end should be placed on the wrist or belt. 8. The running-in period is about 10 hours or a month, and during the running-in period, do not drive with a high accelerator. 9. Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about six months. 10. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. NoteOur machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.
Description
Flexible Steering: Forward, neutral and reverse gears, and a 360-degree steering function allow you to flexibly control the direction of the ship. Application This outboard motor is suitable for small ships with different materials(width less than 4.9 feet and length less than 19.7 inches), such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats. It is widely used in fishery, aquaculture, outdoor exploration, etc. Gear Oil Filling Method There is a screw on the gearbox, unscrew the screw to add gear oil. Each machine will be filled with gear oil before leaving the factory, so it does not need to be refilled when it is used for the first time. After that, add according to personal use, and check every ten hours. Specification Material: Aluminum Alloy Color: Black Model: 18HP Horsepower Long Axis Displacement: 246CC Gear Ratio: 2.08 (27:13) Number of Cylinders: 2 Speed: 4500-5500RPM Gear: F-N-R Refueling Method: 92 Unleaded Gasoline is Recommended Oil Tank Capacity: 24L/6.34gal Load-bearing Capacity: 500-1000kg/1102-2204lbs Ignition System: CDI Cooling System: Water Cooling Control System: Tiller Control Start System: Manual Start Propeller Specification: 23.5cm/9.25in (Length) * 20.3cm/8in (Diameter) Suitable Stern Plate Height: 45cm-55cm/17.7*21.7in Cylinder Diameter * Stroke: 56mm/2.2in*50mm/2in Recommended Engine Oil: 2 Stroke Engine Oil Mixing Ratio: Fuel: Oil = 50:1 Trim and Tilt System: Manual Tilt Net Weight: 28kg/61.7lbs Gross Weight: 30kg/66.1lbs Package Size: 133*71*38.5cm/52.4*28*15.2in Product Size: 87.3*33.2*117cm(34.4*13.1*46.06inch) Package Included 1x Outboard Motor 1x Flameout Rope 1x Oil Pipe 1x Sealing Ring 1x Paper Pad 1x Spark Plug 1x Start Rope 1x Water Pump Impeller 1x Cotter Pin 1x Fuel Tank 1x English Manual Other Tools Notes 1. The two-stroke outboard must use a mixture of No. 92 gasoline and two-stroke engine oil. 2. The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1. 3. After the running-in period, the volume ratio of gasoline and oil is 50:1. 4. Special attention: gasoline and engine oil must be pre-mixed and stirred evenly, and then poured into the fuel tank. 5. The outboard motor must be started in water, do not start the engine on shore. 6. Loosen the vent screw on the fuel tank cover counterclockwise when starting. 7. When the outboard motor is started, the emergency flameout rope should be inserted, and the other end should be placed on the wrist or belt. 8. The running-in period is about 10 hours or a month, and during the running-in period, do not drive with a high accelerator. 9. Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about six months. 10. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. NoteOur machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.