Your wishlist is now on collections - Saved Products
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
7.5hp 4 Stroke Heavy Duty Outboard Motor Marine Boat Engine w/Air Cooling System
This product ad may change over time
Share7.5hp 4 Stroke Heavy Duty Outboard Motor Marine Boat Engine w/Air Cooling System
Description This is a stable and powerful four-stroke outboard engine. This outboard engine features a high-precision intake and exhaust system that significantly improves the fuel transfer rate. Its large 1.8-liter fuel tank enables it to operate for more than an hour. Such an energy-saving, stable and efficient outboard engine is a good assistant for …
Description This is a stable and powerful four-stroke outboard engine. This outboard engine features a high-precision intake and exhaust system that significantly improves the fuel transfer rate. Its large 1.8-liter fuel tank enables it to operate for more than an hour. Such an energy-saving, stable and efficient outboard engine is a good assistant for your water operation. Details Anti-slip Handle: The handle is designed with an uneven and anti-slip design, which can effectively prevent slipping. Aluminum Propeller: The propeller blade is made of high-quality aluminum, which is strong and corrosion-resistant. Application The outboard engine is suitable for all kinds of small boats of 2.7~8 meters, such as rubber boats, wooden boats, fishing boats, etc. It can be widely used in water sports, water tourism, fishery production, and other fields. How to Use 1. Add enough gasoline and the right amount of engine oil. The amount of oil is based on the scale mark. 2. Turn on the flameout switch and snap the black buckle of the emergency flameout cable on. 3. Close the damper (the damper is closed before cold air starts, and the damper is open before the hot engine starts) 4. Throttle handle adds a little throttle. 5. Pull the starter puller or start the electric starter switch to turn on the engine. 6. Open the damper to the maximum, start the rear damper and keep it open the whole time. (number 1 is off, number 4 is on) Specification Material: Aluminum, Steel Pipe, Plastic Speed: 8-15 km/h Fuel Tank Capacity: 1.8L/0.47gal Displacement: 196cc Rotational Speed: 3600r/min Motor: Four-stroke Power: 7.5hp Product Size: 118*38cm/46.45*14.96in Handle Length: 84cm/33.07in Operating Rod Length: 80cm/31.51in Package Size: 128*54*40.5cm/50.39*21.25*15.94in Applicable Boat Length: 2.7-8m/8.85-26.24ft Net Weight: 33kg/72.75lbs Gross Weight: 34kg/74.95lbs Package Included 1*Outboard Engine 1*Funnel All Accessories for Installation Notes The driving speed is about 8~15km/h, and the driving distance is different depending on the type of boat and the current condition of the load. The four-stroke fuel is 92#, and the engine oil is added to the internal tank separately. The outboard engine was factory tested for one hour before leaving the factory. It is normal to have a bit of wear and tear. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.
Description
Description This is a stable and powerful four-stroke outboard engine. This outboard engine features a high-precision intake and exhaust system that significantly improves the fuel transfer rate. Its large 1.8-liter fuel tank enables it to operate for more than an hour. Such an energy-saving, stable and efficient outboard engine is a good assistant for your water operation. Details Anti-slip Handle: The handle is designed with an uneven and anti-slip design, which can effectively prevent slipping. Aluminum Propeller: The propeller blade is made of high-quality aluminum, which is strong and corrosion-resistant. Application The outboard engine is suitable for all kinds of small boats of 2.7~8 meters, such as rubber boats, wooden boats, fishing boats, etc. It can be widely used in water sports, water tourism, fishery production, and other fields. How to Use 1. Add enough gasoline and the right amount of engine oil. The amount of oil is based on the scale mark. 2. Turn on the flameout switch and snap the black buckle of the emergency flameout cable on. 3. Close the damper (the damper is closed before cold air starts, and the damper is open before the hot engine starts) 4. Throttle handle adds a little throttle. 5. Pull the starter puller or start the electric starter switch to turn on the engine. 6. Open the damper to the maximum, start the rear damper and keep it open the whole time. (number 1 is off, number 4 is on) Specification Material: Aluminum, Steel Pipe, Plastic Speed: 8-15 km/h Fuel Tank Capacity: 1.8L/0.47gal Displacement: 196cc Rotational Speed: 3600r/min Motor: Four-stroke Power: 7.5hp Product Size: 118*38cm/46.45*14.96in Handle Length: 84cm/33.07in Operating Rod Length: 80cm/31.51in Package Size: 128*54*40.5cm/50.39*21.25*15.94in Applicable Boat Length: 2.7-8m/8.85-26.24ft Net Weight: 33kg/72.75lbs Gross Weight: 34kg/74.95lbs Package Included 1*Outboard Engine 1*Funnel All Accessories for Installation Notes The driving speed is about 8~15km/h, and the driving distance is different depending on the type of boat and the current condition of the load. The four-stroke fuel is 92#, and the engine oil is added to the internal tank separately. The outboard engine was factory tested for one hour before leaving the factory. It is normal to have a bit of wear and tear. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.