Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 10,000 lbs GTW, 1,000 lbs TW EQ37101ET
This product ad may change over time
ShareEqual-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 10,000 lbs GTW, 1,000 lbs TW EQ37101ET
Steel-on-steel friction works to prevent and correct trailer sway in this unique weight distribution system. Sway control brackets ensure that your trailer stays in line with your tow vehicle. Shank sold separately. 2-5/16" Hitch ball included. Features: Evenly distributes weight over axles of tow vehicle and trailer for stability and control Creates a level rid…
Steel-on-steel friction works to prevent and correct trailer sway in this unique weight distribution system. Sway control brackets ensure that your trailer stays in line with your tow vehicle. Shank sold separately. 2-5/16" Hitch ball included. Features: Evenly distributes weight over axles of tow vehicle and trailer for stability and control Creates a level ride for both tow vehicle and trailer Integrated 4-Point Sway Control limits side-to-side movement Brackets keep spring bars in place for a rigid system that holds trailer in line Steel-on-steel friction helps to minimize sway caused by winds or sudden maneuvers No lift chains - eliminate unwanted movement Unique design makes system compatible with surge-type brake actuators Spring bars flex for a controlled, even ride Constructed of chromoly steel for superior dexterity and spring No-drill, clamp-on brackets can be adjusted along the trailer frame Accommodates frame-mounted items such as gas tanks, battery boxes, toolboxes, or generators Desired tilt is achieved with traditional washer design Add or remove washers from spacer rivet to tilt head up or down Dipped steel construction is durable and corrosion resistant Snap-up lever eases installation by reducing lifting required by trailer jack System includes head assembly, spring bars, sway control brackets, hitch ball, lift handle, and all necessary hardware Adjustable shank sold separately 1-7/8" Thin walled socket (EQ70-00-4800 - sold separately) recommended for hitch ball installation Made in the USA Specs: Tongue weight: 600 lbs - 1,000 lbs Gross towing weight: 10,000 lbs Ball size: 2-5/16" Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Sway control bracket positioning: 27" - 32" back from center of coupler Maximum trailer frame height: 6" Spring bar dimensions: 36" long x 1-3/8" wide Limited lifetime warranty Included w/ System Required - Sold Separately Optional Add-Ons 90-00-1001 Equal-i-zer Weight Distribution Hitch Weight Distribution Head 2-5/16" Chrome Hitch Ball 2 Sway Control Brackets 2 Spring Bars Snap-up Lever Spacer Rivet and Washers Necessary Installation Hardware Adjustable Shank Thin Walled Socket for Installation of Hitch Ball Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch. Selecting a Weight Distribution System The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless. To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system. Features of the Equal-i-zer Head Tilt Adjustment The Equal-i-zer weight distribution system uses the traditional washer-style adjustment method to achieve the perfect tilt. Controlling the head tilt helps you to fine-tune the leverage on your entire system, making it easier to install and hook up the spring bars. To adjust the tilt, simply slide washers onto the spacer rivet and insert the rivet into the head assembly. To increase the angle, add a washer. To reduce the angle, remove a washer. Most setups take four to six washers to achieve the proper height. Once you get the desired tilt, insert the shank bolts to secure the head to the shank (sold separately) and then tighten it in place. Construction of Spring Arms The Equal-i-zer spring bars are not made of traditional spring steel. Rather, they are constructed of a chromium-molybdenum alloy steel. Chromoly steel has a high tensile strength for extreme durability. It also features excellent dexterity, which allows it to give as required and then return softly back to its original form. This pliability is important in minimizing trailer bounce while still ensuring that the weight of your rig is adequately distributed. Fixed Sway Control Brackets The unique sway control brackets of the Equal-i-zer are easy to install and simple to use. They clamp onto your trailer frame and conveniently adjust to a position anywhere between 27 inches and 32 inches back from the coupler. These brackets provide the attachment points for the weight
Description
Steel-on-steel friction works to prevent and correct trailer sway in this unique weight distribution system. Sway control brackets ensure that your trailer stays in line with your tow vehicle. Shank sold separately. 2-5/16" Hitch ball included. Features: Evenly distributes weight over axles of tow vehicle and trailer for stability and control Creates a level ride for both tow vehicle and trailer Integrated 4-Point Sway Control limits side-to-side movement Brackets keep spring bars in place for a rigid system that holds trailer in line Steel-on-steel friction helps to minimize sway caused by winds or sudden maneuvers No lift chains - eliminate unwanted movement Unique design makes system compatible with surge-type brake actuators Spring bars flex for a controlled, even ride Constructed of chromoly steel for superior dexterity and spring No-drill, clamp-on brackets can be adjusted along the trailer frame Accommodates frame-mounted items such as gas tanks, battery boxes, toolboxes, or generators Desired tilt is achieved with traditional washer design Add or remove washers from spacer rivet to tilt head up or down Dipped steel construction is durable and corrosion resistant Snap-up lever eases installation by reducing lifting required by trailer jack System includes head assembly, spring bars, sway control brackets, hitch ball, lift handle, and all necessary hardware Adjustable shank sold separately 1-7/8" Thin walled socket (EQ70-00-4800 - sold separately) recommended for hitch ball installation Made in the USA Specs: Tongue weight: 600 lbs - 1,000 lbs Gross towing weight: 10,000 lbs Ball size: 2-5/16" Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Sway control bracket positioning: 27" - 32" back from center of coupler Maximum trailer frame height: 6" Spring bar dimensions: 36" long x 1-3/8" wide Limited lifetime warranty Included w/ System Required - Sold Separately Optional Add-Ons 90-00-1001 Equal-i-zer Weight Distribution Hitch Weight Distribution Head 2-5/16" Chrome Hitch Ball 2 Sway Control Brackets 2 Spring Bars Snap-up Lever Spacer Rivet and Washers Necessary Installation Hardware Adjustable Shank Thin Walled Socket for Installation of Hitch Ball Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch. Selecting a Weight Distribution System The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless. To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system. Features of the Equal-i-zer Head Tilt Adjustment The Equal-i-zer weight distribution system uses the traditional washer-style adjustment method to achieve the perfect tilt. Controlling the head tilt helps you to fine-tune the leverage on your entire system, making it easier to install and hook up the spring bars. To adjust the tilt, simply slide washers onto the spacer rivet and insert the rivet into the head assembly. To increase the angle, add a washer. To reduce the angle, remove a washer. Most setups take four to six washers to achieve the proper height. Once you get the desired tilt, insert the shank bolts to secure the head to the shank (sold separately) and then tighten it in place. Construction of Spring Arms The Equal-i-zer spring bars are not made of traditional spring steel. Rather, they are constructed of a chromium-molybdenum alloy steel. Chromoly steel has a high tensile strength for extreme durability. It also features excellent dexterity, which allows it to give as required and then return softly back to its original form. This pliability is important in minimizing trailer bounce while still ensuring that the weight of your rig is adequately distributed. Fixed Sway Control Brackets The unique sway control brackets of the Equal-i-zer are easy to install and simple to use. They clamp onto your trailer frame and conveniently adjust to a position anywhere between 27 inches and 32 inches back from the coupler. These brackets provide the attachment points for the weight
Specifications
| Part Number | Eq37101et |
| Brand | Equal-i-zer |
| Part Type | Weight Distribution |
| Manufacturer Part Number | Eq37101et |